Electronics Line 3208GLD Bedienungsanleitung PDF herunterladen (Seite 39)

ADDRESSES 412-475: CUSTOM LCD ZONE DESCRIPTORS

Four of the descriptors that can be assigned to each zone (see Address 000) can be customized to suit a

specific installation. A total of sixteen characters, including spaces, can be entered for each LCD custom

zone descriptor using the following table. Each custom zone descriptor is entered in a series of

consecutive addresses. It is recommended to fill in all 16 characters for each custom zone descriptor.

Example: To set Custom Zone Descriptor 1 as “ABC”, enter 41, 42, 43, 20, 20, 20, 20, 20, 20, 20, 20,

20, 20, 20, 20, 20 at addresses 412-427, respectively.

20 space 2D

21 ! 2E

“

‘

(

)

412-427 Custom Zone Descriptor 1

428-443 Custom Zone Descriptor 2

444-459 Custom Zone Descriptor 3

460-475 Custom Zone Descriptor 4

ADDRESS 476: ZONE EXPANDERS

476 Definition of Zone Expander Modules. When installing zone expanders (hardwire or

wireless), the system must be programmed to recognize the existence of the additional zones.

All defined zone expanders are supervised. If a zone expander is disconnected, all its zones

are opened. Note: Following any modifications made to this address, disconnect and

re-apply both AC and battery power to enable the changes to take effect.

Zone Expander

To install any combination of zone expander units enter the data value from the following table.

Second digit value

Units Value Units Value Units Value Units Value

A(1-8) 1 A,B 3 B,D A A,C,D D

B(9-16) 2 A,C 5 C,D C B,C,D E

C(17-24) 4 A,D 9 A,B,C 7 A,B,C,D F

D(25-32) 8 B,C 6 A,B,D B

Wireless Zone Expander

To add wireless zone expander units, enter a value from the following table. A wireless zone expander must

be defined in both the first and second digits of this address. For example, if three zone expanders ABC are

added to the control panel and B is wireless, the data entered at this address should be 27.

First digit value

W/L Units Value W/L Units Value W/L Units Value W/L Units Value

A(1-8) 1 A,B 3 B,D A A,C,D D

B(9-16) 2 A,C 5 C,D C B,C,D E

C(17-24) 4 A,D 9 A,B,C 7 A,B,C,D F

D(25-32) 8 B,C 6 A,B,D B

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 50 51

Keine Kommentare

Electronics Line 3208GLD Bedienungsanleitung Seite 39