Electronics Line 3208GLD Bedienungsanleitung PDF herunterladen (Seite 37)

ADDRESS 388: SWINGER PARAMETERS

Swinger mode.

Defining a zone as a Swinger limits the number of alarms that can be generated from that zone within a

pre-programmed amount of time. Each zone can be programmed with its Swinger option active. All

swinger zones are assigned the same swinger setting.

Example: If zone 1 is set as a swinger at address 001, and swinger mode is set to “1 alarm in 1 arming

period” at address 388, only one alarm will be accepted from this zone within every one arming period.

Any subsequent alarms from this zone are ignored by the system.

388

00 - 1 alarm in 1 arming period

or enter a hexadecimal value at this address from 01 to FF. Each hexadecimal unit represents

a period of 15 minutes. This can be calculated by multiplying the required amount of time by 4

then converting to hexadecimal using the conversion chart in Appendix B. For example, to

program one alarm every three and a quarter hours, enter 0D. 3¼ x 4 = 13, 13 = D.

ADDRESSES 389-409: OPENING & CLOSING WINDOWS

For each day of the week, one of three opening window options and four closing window options can be

set. These are programmable at addresses 389-395. To program a window time and size, use the follow-

ing table. The times listed in the rows indicate the center of the window. The size of the window can be

selected from the columns. For example, a window starting at 7:30 and ending at 8:30 will be prog-

rammed as 41 (8:00 ±30 minutes). Note: To disable an opening or closing window option, enter FF.

Time

±±15

min

±±30

min

±±45

min

±±60

min

Time

±±15

min

±±30

min

±±45

min

±±60

min

00:00 12:00

60 61 62 63