Electronics Line 3208GLD Bedienungsanleitung PDF herunterladen (Seite 9)

SELECT ZONE 1-8

<AWAY> TO EXIT

SYSTEM 1 READY

(BYPASSED)

ZONE 01 BYPASSED

FRONT DOOR

To activate an emergency key press the “MENU/NEXT” key and then, while pressing

the key, press the desired emergency key, for over one second. These keys may be

programmed to sound a siren when pressed. Contact your installer to find out if this has

been programmed for your Summit security system.

A user code can be programmed for a duress situation. A duress code has an

authorization level of 15. This user code will perform the selected operations (such as

arming, disarming, bell canceling, etc.) while sending a duress code to the central

station, notifying them of a duress (hostage) situation.

YPASSING

NBYPASSING

Zones which can not be armed, due to any number of reasons, can be bypassed,

excluding them from an arming. Please consider if the area needs to be bypassed

before following the procedure.

Note: A bypassed zone is not protected by the security

system.

To bypass a zone using the LED keypad:

1. Press “SELECT” 3, 1 and enter your authorized user code if

the PROGRAM indicator is blinking.

2. Enter the zone number.

3. Press “AWAY”; the zone number and the BYPASS

indicators blink.

To unbypass a zone using the LED keypad:

1. Press “SELECT” 3, 2 and enter your authorized user code if

the PROGRAM indicator is blinking.

2. Enter the zone number.

3. Press “AWAY”; The zone number indicator will turn off

(unless the zone is still open) and the BYPASS indicator will

turn off.

To bypass using the LCD keypad:

1. Press “SELECT” 3, 1 and enter your authorized user code.

2. Enter the zone number or scroll through the menu. The LCD

display will display that zones have been bypassed and list

the zones bypassed, one per screen.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

Electronics Line 3208GLD Bedienungsanleitung Seite 9