Electronics Line 3208GLD Bedienungsanleitung PDF herunterladen (Seite 6)

SYSTEM 1 READY

SYSTEM 1 ARMED

011 SEC TO EXIT

SYSTEM 1 ARMED

IMMEDIATE

in the area armed, such as during the day, when your home would be empty, or at night

when your business would be closed.

To arm the system using the LED keypad:

1. Check to make sure the ready indicator is on.

2. Press either the “STAY” or “AWAY” keys. If one key

arming is disabled, enter your user code.

3. The ARMED indicator will light up, indicating that the

system is armed. Exit the area within the exit delay

countdown. Note: Failure to exit during the exit delay

period will result in an alarm.

To arm the system using the LCD keypad:

1. Check that the display reads “SYSTEM X READY.”

2. Press the “STAY” or “AWAY” keys. A user code needs to

be entered if one key arming has been disabled. The LCD

display will read “SYSTEM X ARMED, XX SEC TO EXIT!”

Note: If the system is partially ready, you will only be

able to arm the perimeter.

3. The ARMED indicator lights up, indicating that the system

is armed. Exit the area within the exit delay count down.

Note: Failure to exit during the exit delay will result in

an alarm.

4. For immediate arming (to eliminate the exit/entry delay)

press either the “STAY” or “AWAY” key, followed by your

authorized user code (if necessary) and then the 4 key.

The system can be programmed to have an exit delay, allowing you to exit the area,

within a certain time frame, without sending an alarm. Your keypad/s may be

programmed to have continuous beeps throughout the exit/entry delay period. Ask your

installer to program these features for you.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Keine Kommentare

Electronics Line 3208GLD Bedienungsanleitung Seite 6