Electronics Line 3208GLD Bedienungsanleitung PDF herunterladen (Seite 7)

SYSTEM 1 READY

ZONE 4 IN ALARM

BEDROOM

Bypassing a zone removes it from your system.

Note: A bypassed zone is not

protected by the security system.

ISARMING

EACTIVATING THE

YSTEM

)

Upon arriving back to the area protected by your Summit, you will need to disarm the

system. Failure to disarm the system during the entry delay (if programmed) or after

entering the protected area will result in an alarm.

To disarm the system using the LED keypad:

Enter your authorized user code. The system is now disarmed

and the armed indicator will turn off.

To disarm the system using the LCD keypad:

Enter your authorized user code. The system is now disarmed

and the armed indicator will turn off.

Alarm Indication

On the LED keypad the zone indicator for the zone/s in alarm

will blink. The LCD display will display which zone is in alarm.

Note: If upon returning to the premises your panel indicates an

alarm has taken place, leave immediately. Go to the nearest

neighbor and telephone the authorities for help.

Accidental Alarms

Should the alarm sound accidentally while disarming the system make sure to notify

your alarm monitoring service and the appropriate authorities.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

Electronics Line 3208GLD Bedienungsanleitung Seite 7