Electronics Line iconnect Bedienungsanleitung PDF herunterladen (Seite 5)

1.2: Zones

The Penta control panel includes four security zones plus one tamper zone which can be

defined for use with an ON/OFF keyswitch. The four security zones are fully pro-

grammable and supervised by end of line resistors. The Penta offers five zone response

types for customized programming to suit a wide range of installations. Each zone can be

programmed to activate a siren/bell when tripped or to generate a silent alarm where only

a message is sent to the central station. The following is a summary of the operational

characteristics for each zone response type:

Perimeter Zone

Perimeter zones instantly generate an alarm when opened.

Suggested Use: Magnetic contacts or detectors protecting the doors and windows which

are never used to enter the premises.

Perimeter Zone With Delay

This zone type starts the entry delay when opened, allowing the user time to disarm the

system.

Suggested Use: Magnetic contacts or detectors protecting the doors commonly used to

enter or leave the premises.

Conditional Zone

If a perimeter zone with delay is opened first, conditional zones do not generate an alarm

when opened during the entry delay. If a conditional zone is opened first, an alarm is

generated instantly.

Suggested Use: Detectors protecting the area in which a keypad has been installed or the

area crossed in order to reach the keypad.

Interior Zone

Interior zones are automatically bypassed when the system is armed using the ‘Stay’

command Q, 9.

Suggested Use: Detectors protecting the interior areas in which the user requires

unrestricted movement when ‘Stay’ arming. For example bedrooms, bathrooms and

interior offices.

24hr Zone

24hr zones always generate an alarm when opened whether the system is armed or

disarmed.

Suggested Use: Panic buttons, glassbreak detectors and areas which require 24 hour

protection.

1.3: Telephone Communication

The Penta allows for up to two telephone numbers (primary and backup) to be

programmed into the system dedicated to central station communications or for use with

the ‘Follow-me’ format. An additional number can be programmed for use in conjunction

with the RP callback feature. Up to 16 digits can be programmed for each telephone

number. The Penta offers a number of communication options and supports either pulse

or DTMF dialing. If after five attempts the panel does not succeed to communicate, the

panel dials the backup telephone number. If communication is unsuccessful, the panel

will attempt to communicate every half hour until communication is established.

1 2 3 4 5 6 7 8 9 10 ... 32 33

Keine Kommentare

Electronics Line iconnect Bedienungsanleitung Seite 5