Electronics Line PENTA Bedienungsanleitung PDF herunterladen (Seite 6)

-6-

Note: Do not erase User Code 1! Erasing this code denies the user the ability to program

user codes. If User Code 1 is accidentally erased, contact your installer.

Duress Code

In the event that you are forced to disarm the system, entering the duress code disarms

the system and sends a silent alarm to the central station.

To program the duress code:

1. Press 4, 5.

2. Enter User Code 1.

3. Press 5; the Ready indicator flashes.

4. Enter a new duress code or 4, 4, 4, 4 to erase the existing code.

3.5: Arming/Disarming

The following section explains the various arming and disarming methods.

Arming

To arm the system:

1. Check that all zones are closed; the Ready indicator lights up showing that the

system is ready to be armed.

2. Enter a valid user code; the keypad beeps until the end of the exit delay.

Forced Arming

Forced arming enables you to arm the system even if zones are not secured. Electronics

Line recommends waiting until all of the zones are secured and the system can be armed

normally.

Note: If zones are still not secured after the exit delay has ended, an alarm will be generated.

To force arm the system:

1. Press 4, 8.

2. Enter a valid user code; the keypad beeps until the end of the exit delay.

Quick Arming

This feature allows you to arm the Penta Plus without entering a valid user code.

To “Quick” arm the system:

1. Check that all zones are closed; the Ready indicator lights up showing that the

system is ready to be armed.

2. Press 4, 0; the keypad beeps until the end of the exit delay.

Stay Arming

This feature arms perimeter zones only, allowing you to stay within the protected area while

the system is armed.

To “Stay” arm the system:

1. Check that all zones are closed apart from the interior zones; the Ready

indicator lights up showing that the system is ready to be armed.

2. Press 4, 9.

3. Enter a valid user code; the keypad beeps until the end of the exit delay.

Immediate Arming

The system can be operated without an entry/exit delay. Pressing 4 during the exit delay

or when the system is armed cancels both the exit and entry delay times.

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare

Electronics Line PENTA Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Electronics Line PENTA