Electronics Line PENTA Bedienungsanleitung PDF herunterladen (Seite 4)

-4-

3: System Operation

3.1: Keypad Layout

The following diagram shows the keypad layout for the Penta Plus XL control panel. The

layout of the keypad supported by Penta XL control panels is identical except for the

number of zone indicators.

READY1 234

6 7 8 SYSTEM

Figure 3.1: Keypad Layout

Display

1 - 8: Indicators 1 - 8 (or 1 - 4 on the Penta XL) are used to display zone status. The

corresponding indicator lights up if a zone is open. If a zone is bypassed the

corresponding indicator blinks.

READY: The Ready indicator lights up to indicate that there are no open zones or

tamper conditions and the system is ready to be armed.

SYSTEM: The System indicator blinks to indicate that new events have been recorded in

one of the logs and when displaying additional system information such as bypass mode.

ARMED: The Armed indicator lights to indicate the system is armed or in

programming mode and flashes during the exit delay.

POWER: The Power indicator lights up when both AC & battery power are OK,

blinks when the battery is low & AC power is OK, and goes out in the event of AC

failure.

Buzze

System Status

Indicators

Numeric

Keypad

Status

Indicators

Distress Keys

Zone

Indicators

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Electronics Line PENTA Bedienungsanleitung Seite 4